Unvented Megaflo boiler system guide. Prices, types and best options.
If you have ever wondered what an unvented Megaflo boiler system is then you have come to the right place because, in this article, we are going to be looking at them in great detail.
If you keep reading, you are going to learn what this is, how it works, the pros and cons of using one, and a whole array of different information relating to these systems.
So, do you want to know more about them?
What is an Unvented Megaflo boiler system?
A Megaflo system, which is commonly misspelt or heard as a ‘Megaflow system’ is a cylinder made of stainless steel.
It is unvented and stores hot water as part of the central heating system that your home has.
Something that you do need to be aware of and keep in mind though is that the Megaflo unvented is not a boiler, but rather a hot water cylinder.
There is a popular unvented Megaflo system boiler range, but that is completely unrelated to the topic that we are going to be discussing in this article.
Now, the Megaflo cylinder can be either indirect or direct, and the difference between the two is how the water is heated.
If it is indirect, the water is heated by a separate regular boiler or system boiler, but if it is directly heated, then it is going to be heated by a built-in element that is already in the cylinder.
In certain homes, you might have a switch that sits by your cylinder that you can press if your boiler fails.
What this does is turn on the immersion coil which is in the cylinder, and this will then heat up the water inside without having the boiler supply the hot water.
An important thing that you need to remember is that it is not recommended to have your boiler and immersion switch on at the same time. This could be dangerous and cause your system a lot of problems.
How does a Megaflo work?
The first thing that you need to know is that there are two types of unvented Megaflo.
We touched on this briefly above, but we are going to go into more detail now.
The first one that we are going to look at is the Indirect Unvented Megaflo.
The indirect version uses hot water that is supplied by an external provider such as a boiler.
As this is the case, the coil that is inside the cylinder is used to maintain the temperature of the hot water so that it stays at the correct temperature.
The temperature has been set by the thermostat, and the coil inside works to make sure it doesn’t dip below or above this.
When the hot water exists the unvented indirect Megaflo, the boiler will then top up the hot water in the cylinder so that there is always plenty there.
The other type is the direct unvented Megaflo.
This product will use the mains cold water as the water supply.
There is an immersion heater inside the cylinder, and this heats the water using electricity until it hits the predetermined temperature set by the thermostat.
If you want to make sure that you have a steady supply of hot water available whenever you turn on a tap in your home, the recommended temperature for your thermostat is 60 degrees.
When the hot water exits the cylinder, the Megaflo system will top up the water supply with cold water that it gets from your main water feed.
Who manufactures Megaflo boilers?
Megaflo is manufactured by Heatrae Sadia.
The Megaflo hot water system is the most popular range that the company has ever produced and has even won awards for being so great.
The good thing about it is that it can slot right into our everyday modern lifestyle in which we use more hot water.
This range can keep up with the ever-changing needs of normal people when they are running baths, having their radiators on and using a powerful shower.
Heatrae Sadia also prides themselves on their Megaflo products because of the excellent balance of reliability and efficiency that they provide.
People use hot water every day and need a system that isn’t going to crash on them all the time, which is something that the Megaflo range can do.
Pros Of a Megaflo Boiler
The first pro of having a Megaflo system is that if you have a household that has limited space available, you are not going to need to make room for a big loft installed tank as well as the cylinder.
This can take a lot of stress away from the situation, and make it a more pleasant experience to deal with. As well as this, because you no longer need a cold water tank, you are going to be able to have more of a choice about where you want your Megaflo cylinder to be installed.
It doesn’t necessarily have to be in one certain place if you don’t want it to be, it can be moved just like a boiler flue.
Something else that you will find is that these cylinders are very easy to install, and the parts are easy to replace and maintain.
So, if you want to make sure that you are keeping it in the best possible working order, just make sure you are checking the parts every now and then. Like we said above, if your boiler does break down, the system is compatible with solar PV, making it a renewable energy source, and providing you with a back-up in case things go wrong at some point.
If you live in a busy household, this isn’t going to be an issue because even if you have two or three outlets running at the same time, you can still look forward to having a high-pressure shower.
These unvented system boilers are made in the UK.
Finally, there is a range of safety features on this system, so it has been made to be as safe as possible.
For example, one of these is that the cylinder thermostat shuts down when it gets to the right temperature.
If at any point it does become too hot, the Temperature/Pressure Relief Valve will get rid of water from the cylinder to reduce pressure.
Cons of a Megaflo Boiler
As you are going to be using the mains for your water supply, if the mains is low in pressure, the pressure of water that you receive will also be weak.
That is why you are going to want to have a flow rate rest completed, which will tell the engineers the pressure of your mains supply. It can then be determined whether the Megaflo system is going to be right for your home.
As well as this, the high velocity of water that is going to be flowing through the pipes can get quite noisy, so expect to hear a lot of water gushing through the house.
The pipework is also going to have to be checked to make sure that it can withstand the pressure.
If it isn’t going to be able to handle the pressure, then you might need to replace the pipes if you want a Megaflo and this can cost you a lot of money.
Finally, as you are going to be using the mains water supply, there is no backup storage of cold water.
The Megaflo cylinder can only do so much, and you need to make sure there is a constant supply of water pressure from your mains pushing through it, or you could end up with a shortage of hot water.
Megaflo Warranty length
Due to the varying levels of water hardness in the UK, making sure that you get a long-lasting warranty is going to be important.
Boiler manufacturers like Worcester Bosch or Veissmann offer up to 10 year warranty, however they do not offer a Megaflo System with an unvented hot water cylinder or expansion vessel and you will be looking at boiler replacement for around £17 per month.
Some regions in the UK have soft water, and some have hard water. Depending on which of these you have, this can lead to issues such as limescale on your kettle or your pipes.
The company wouldn’t offer this if they weren’t completely confident in their stainless-steel cylinder.
You should be aware though that other components needed for your unvented boiler system may have shorter warranties than the one offered on this product.
You might be wondering if the Megaflo is going to be good enough to serve for larger households that have multiple bathrooms and outlets?
The answer is yes, the Megaflo is going to be able to provide for your hot water needs.
It is also important to note that if you do have a larger house and have several outlets on at the same time, you should expect a constant and steady stream of water pressure.
You will see that this is much better than when you are using a combi boiler where the hot water gets split between outlets, meaning that there is going to be an overall drop in pressure.
The Megaflo doesn’t let you down here, and you will get the same pressure all over the home.
Can you use Megaflo with solar?
One of the great things about the Megaflo from Heatrae Sadia is that the hot water tanks are compatible with solar thermal energy.
What this means is that it is great for the environment as it can make use of renewable energy sources.
Heatrea Sadia have various approvals and accreditations such as the below:
If you are conscious about the environment and want to do your bit in your home to help cut down on electricity usage, then this could be a good option to think about.
Or, if you have solar panels installed on your home, then these will be able to provide a back-up heat source if anything ever happens to your boiler, causing it not to function properly.
In addition to many great accreditations, they have various quality standards too:
Safety Precautions And Tips You Need To Think About
If the temperature of the water in your cylinder exceeds 100 degrees celsius, this can be extremely dangerous, which is why unvented boiler systems use thermostat controls to keep the temperature correct.
The temperature that you want your water to be at is between 60 and 65 degrees celsius which is usually the default setting.
Anything lower can increase the risk of dangerous bacteria forming in your water which could cause you some bad health problems.
You must make sure that any cylinder, boiler or anything to do with your central heating system is installed and maintained by a Gas Safety Engineer.
They need to have their Unvented Hot Water qualification to be able to install or inspect these cylinders.
This is important because a lot of things could go wrong, and you need someone there who knows what they are doing. Otherwise, it is unsafe and dangerous just like a flue under a carport!
The Megaflo system is incredible, and as an extra safety precaution, if the temperature for any reason reaches 85 degrees, the thermostat in the cylinder cuts the boiler off to make sure that the temperature cannot rise any further.
This makes sure that the water does not get to a dangerous temperature and risk harming the people in the house.
Finally, you need to be aware that water expands when it gets hot, which increases the boiler pressure in the cylinder.
If the pressure inside the cylinder gets too high, it can become explosive, which is why there are temperature controls, and a Release Valve to make sure that any excess pressure is released into the drain.
This will reduce the temperature of the water and the pressure, making it safe once more.
Other systems from Heatrea Sadia
Some of the other options that are available from this fantastic company are below:
- Megalife Solar
- Megaflo Eco SystemFit
- Megaflo Eco Plus
- Megaflo Eco SolaReady
We hope that you have found this article helpful, and now have all the information that you need about unvented Megaflo boiler systems.
If you have recently purchased a Megaflo boiler system, you can view the official Megaflo installation and manual guide.
Thanks for reading, and now you can decide whether this is going to be the right solution for your home.
If you are looking for a new boiler why not get a fixed price online now. We offer a range of combi boilers, system boilers and back boiler removal and replacement.