F28 Vaillant fault code, meaning, causes and how to fix
Vaillant F28 fault code: meaning, causes and how to fix it
Quick answer: Vaillant F28 means the boiler did not detect a flame when it tried to light, and it has locked out. Vaillant describes this as “the flame signal was not detected during the ignition phase.” First check that other gas appliances are working (and that a prepayment meter has credit), and in cold weather check the outdoor condensate pipe for ice. If you can deal with those, reset the boiler once by pressing the reset or fault clearance button for one second. If F28 comes back after three reset attempts, or you cannot find an obvious cause, call a Gas Safe engineer. Do not keep resetting it.
F28 can appear on Vaillant ecoTEC Pro, ecoTEC Plus, ecoTEC Exclusive and ecoFIT Pure boilers after failed ignition attempts. The boiler stops trying so that unburned gas cannot build up. This page covers what the code means, what you can check safely, how to reset it, and when you need an engineer.
What Does the Vaillant F28 Fault Code Mean?
| Code | Classification | Meaning |
|---|---|---|
| F28 | Ignition lockout | Boiler failed to ignite after three attempts, no flame detected |
The F28 is a lockout fault, not a blocking fault. A blocking fault is a temporary pause that clears automatically when the condition resolves. A lockout requires a manual reset after the cause has been identified and addressed, the boiler will not restart by itself regardless of how long it is left. Attempting to reset the boiler without resolving the underlying cause will result in F28 reappearing after the next failed ignition sequence.
If the boiler is beyond a sensible repair, a new gas boiler is supplied and fitted from £1,790, prices vary. See our guide to new boiler cost, or get a fixed price on our quote.
What causes the Vaillant F28 fault code?
Vaillant’s own F.28 guidance lists these as the usual causes: not enough gas reaching the boiler (for example low gas pressure, or no credit on a prepayment meter), condensate backing up because the condensate pipe is blocked or frozen, a faulty ignition electrode, a faulty circuit board, or a problem with the flue. You can check the gas supply and the outdoor condensate pipe yourself. Anything inside the boiler casing needs a Gas Safe engineer.
1. Frozen or blocked condensate pipe (you can check this)
In cold weather, the condensate pipe, a plastic pipe that drains acidic wastewater from the boiler to an external drain, can freeze and block. When the condensate cannot drain, it backs up into the boiler and the boiler locks out. A blocked or frozen condensate pipe is one of the causes Vaillant lists for F28.
The frozen section is almost always on the external run of the pipe, the section exposed to outdoor temperatures. It can sometimes be identified by touch as a noticeably colder section of the pipe, or by a visual inspection of the external pipework in freezing conditions.
To thaw the pipe, pour warm, not boiling, water along the external section. A hot water bottle held against the frozen section, warm towels wrapped around the pipe, or a gentle pour of warm water from a jug are all effective approaches. Do not use boiling water, it can damage or split the plastic condensate pipe. Once the blockage clears, reset the boiler as described below.
After resolving a condensate freeze, wrap the exposed external section of the pipe in foam pipe lagging. This simple and inexpensive measure helps stop the same fault coming back in later cold spells.
2. Gas supply (check this before you call an engineer)
If there is no gas reaching the boiler, it cannot light and F28 will appear. Before assuming a boiler fault, check whether other gas appliances in the property, such as a gas hob or oven, are working normally. If they are not, the gas supply to the property has been interrupted and the issue is with the supply rather than the boiler.
If there is engineering work in your area, your gas supplier can confirm it. For properties on a prepayment meter, check the meter credit. If the credit has run out, the gas supply will have stopped. Top up the meter, restore the gas supply, and reset the boiler.
If other gas appliances are working normally but the boiler is still showing F28, the fault may be inside the boiler’s gas path, such as the gas valve. That needs a Gas Safe engineer.
3. Also check the pressure gauge
Low water pressure has its own Vaillant code, F.22, and is not on Vaillant’s F.28 cause list. It is still worth a look at the gauge. If it is below 1.0 bar, you can top it up through the filling loop to between 1.0 and 1.5 bar, with the boiler off and cool, then try one reset. If the pressure keeps dropping, there is likely a leak and you need an engineer. If the gauge is already in range, low pressure is not your F28 cause.
4. Faulty gas valve, ignition electrode, circuit board or flue (engineer required)
If the gas supply and condensate pipe are fine, F28 can be caused by a faulty gas valve, a worn ignition electrode or cable, a faulty circuit board, or a problem with the flue. These all need a Gas Safe engineer. Do not open the boiler casing. The engineer will find the cause and quote you for the repair. Prices vary.
Thinking about a new gas boiler? Get a fixed, all-inclusive price online in under a minute. Supplied and fitted from £1,790.
Get my fixed priceHow to reset a Vaillant boiler after F28
Only reset the boiler once you have checked the gas supply and, in cold weather, the condensate pipe. Vaillant’s ecoTEC instructions say:
- Press the reset or fault clearance button on the front panel for one second. On many ecoTEC models this is the button marked with a flame or a reset symbol. If your model looks different, use the manual on the boiler.
- Wait a couple of minutes for the boiler to try to light again.
- If it lights and F28 does not return, the lockout has cleared.
- If F28 comes back, you can try the reset up to three times in total. If it still fails, stop and call a Gas Safe engineer. Repeated resets will not fix the fault.
We repair all makes of gas boiler. Use our contact form and we will call you back, or see our boiler repair page.
F28 DIY vs Engineer: Quick Reference
| Cause | DIY Fix | Action |
|---|---|---|
| Frozen condensate pipe | Yes | Thaw with warm water, reset boiler |
| Pressure below 1.0 bar (worth checking; official code is F.22) | Check the gauge | If low, top up to 1.0 to 1.5 bar, then reset once |
| Gas supply interrupted (all appliances off) | Check meter/supplier | Contact supplier or top up prepayment meter |
| Faulty gas valve | No | Gas Safe engineer required |
| Failed ignition electrode | No | Gas Safe engineer required |
| Faulty ignition cable | No | Gas Safe engineer required |
| PCB fault or wiring issue | No | Gas Safe engineer required |
What a repair might cost
If the cause is a frozen condensate pipe or a simple reset after the gas supply is restored, you may not need to pay for a repair. For parts such as a gas valve, ignition electrode or circuit board, an engineer will quote you after they have found the fault. Prices vary. If the boiler is old and the repair would cost a large share of a new one, it may be better to replace it. We supply and fit gas boilers from £1,790, prices vary.
How to Prevent the F28 Code from Recurring
Annual boiler servicing by a Gas Safe engineer is the most effective preventative measure against F28 and all other boiler fault codes. At each service, the engineer cleans the burner and ignition components, checks the ignition electrode condition and gap, inspects the gas valve operation, tests combustion quality, and checks system pressure, addressing each of the conditions that cause F28 before they develop into a lockout fault.
Insulating the external condensate pipe after the first freeze lockout prevents recurrence. Checking the boiler pressure gauge monthly and topping up via the filling loop when pressure approaches 1.0 bar prevents low-pressure lockouts from developing. Maintaining adequate inhibitor levels in the system water, checked and replenished at each annual service, prevents the corrosion and sludge accumulation that accelerates gas valve and pump wear over time.
Need a new boiler? Gas boilers fitted from £1,790 (prices vary). We fit Worcester Bosch, Viessmann, Alpha and Ideal. Get your fixed price online.
FAQ
What does F28 mean on a Vaillant boiler?
F28 means the boiler did not detect a flame when it tried to light, and it has locked out as a safety measure. Vaillant’s wording is “the flame signal was not detected during the ignition phase.” Typical causes are a gas supply problem, a blocked or frozen condensate pipe, a faulty ignition electrode, a faulty circuit board, or a flue problem.
Can I fix the Vaillant F28 myself?
You can safely check that other gas appliances are working, top up a prepayment meter if it has run out, and thaw a frozen outdoor condensate pipe with warm, not boiling, water. Then reset the boiler once, as above. Do not open the boiler casing. Anything else needs a Gas Safe registered engineer.
How do I reset a Vaillant boiler showing F28?
After you have checked the gas supply and the condensate pipe, press the reset or fault clearance button for one second. If F28 returns, you can try this up to three times. If it still appears, stop and call a Gas Safe engineer.
How much does it cost to fix a Vaillant F28 fault?
If you can clear a frozen condensate pipe or restore the gas supply yourself, there may be no repair cost. If an engineer is needed, they will quote once they have found the cause. Prices vary. If the boiler is old and the repair is a large share of the cost of a new one, ask whether replacement would be better value. We fit gas boilers from £1,790, prices vary.
Should I replace my Vaillant boiler if it shows F28?
Not necessarily. F28 means there is a specific fault, and in most cases it can be repaired. Replacement is worth considering when the boiler is over 10 years old, outside its warranty, and the repair would cost a large share of a new boiler. A Gas Safe engineer can look at the boiler’s overall condition and advise on whether repair or replacement is better value.
Conclusion
Vaillant F28 means the boiler did not detect a flame when it tried to light. Start with the checks you can do safely: other gas appliances, a prepayment meter, and the outdoor condensate pipe in cold weather. Then reset the boiler once, for one second. If the code comes back after three attempts, or you cannot find an obvious cause, call a Gas Safe engineer. Do not open the casing. Annual servicing is the best way to catch wear that leads to ignition failure before it leaves you without heating.
Ready for a new boiler? Next-day installation if you order by 3pm, guarantees of up to 14 years depending on model and 0% finance available.
Get my fixed price