Is your Boiler not working? ❌
If your boiler has stopped working and you require an engineer, there are a number of different reasons why this may have happened.
In this guide, we are going to reveal everything you need to know about broken boilers, how to fix them and calling an engineer.
This includes details on how to maintain your boilers to ensure that such situations do not happen again in the future, for example cold weather, power cut and water pressure.
With that being said, continue reading to discover everything you need to know.
Some of the most common problems with boilers ?
There are a number of different issues that are associated with boilers today and, therefore, a number of different issues that you may account yourself. Whether you have an old back boiler or a recently installed combi boiler you can always have issues such as your boiler won’t ignite or turn on.
No matter the sort of problem, one important factor that you need to remember is just how critical it is to choose a Gas Safe registered engineer to deal with the problem.
One thing that you should never do is try to rectify the problem yourself.
This may result in it getting worse, meaning a bigger and more expensive problem on your hands.
However, not only this but it is very dangerous to try and fix a gas supply boiler yourself without the required experience, even if you do think that the boiler repair that is needed is straightforward.
So, what are some of the most common issues people tend to experience with their boilers? ?
This includes no heat, low temperature and hot water due to problems with low water levels, issues with the thermostat or fuse box, failure of motorised valves/ diverter valve, and broken airlocks and diaphragms.
In addition to this, dripping and leaking is another type of issue that people experience when it comes to boiler problems. A broken internal component or frozen pipes will typically be the reason for this, for example, the pressure valve or pump seal.
You may also find that corrosion has caused this to occur, especially if your boiler is leaking around the tank or pipes. Other common boiler issues include the boilers switching themselves off, thermostat issues, and low boiler pressure.
5 reasons why your boiler may not be Working ⚠⚠⚠⚠⚠
A faulty boiler can be extremely dangerous, causing carbon monoxide poisoning. This is why it is so important to invest in regular boiler servicing while also being aware of the signs that could mean there is something wrong with your boiler.
Before revealing the five key signs that your boiler needs servicing, it is imperative to stress that it should be serviced annually no matter, as is the case with all gas appliances. These yearly checks will ensure that all of your appliances are in working order while any gas leaks will be repaired, and all of the parts will be inspected, such as pressure gauge, burners and pilot lights.
These checks are critical, however, you shouldn’t merely rely on a yearly inspection. If you think that there is something wrong with your boiler you need to call someone in as soon as possible so that you and your home is protected.
So, let’s take a look at five warning signs you should look out for when it comes to determining whether your boiler needs servicing. ?
1) The boiler is making noises it shouldn’t – If you have noticed some irregular noises coming from the boiler, you should turn it off and call your local gas engineer as quickly as possible.
2) The temperature of the water is not as hot as it should be / you are only receiving a little bit of hot water. This indicates that your boiler is not working properly, which is why a servicing is recommended, so you can get to the bottom of the problem. It may be that one of the parts needs replacing.
3) The pilot light frequently goes out – This also indicates that there is a fault with your boiler, and it is unlikely that your boiler will produce heat as a result.
4) A yellow or irregular flame – If you notice that the flame does not look like as it usually should, then you need to turn your boiler off immediately and get an engineer to your property as quickly as possible. A change in the flame can mean that carbon dioxide is present, so don’t use your boiler until it has been serviced. ⛔
5) Soot or smoke stains are appearing on the appliance or near it – This shouldn’t happen and is a clear indication that your boiler needs servicing. Soot build-up can be dangerous, and there is the risk of carbon monoxide poison if you don’t deal with this issue.
What if you cannot afford to replace your boiler that is not working? ??
If you are interested in combi boiler installation, but you don’t have the funds, you should consider boilers on finance whereby you will pay monthly for a new boiler. Combi boiler installation can be expensive, around £2,000 to £3,000 for a Veissmann boiler, and not everyone has this type of money upfront.
Plus, if you’re not on income-related benefits, you can’t get help with combi boiler installation under the ECO scheme.
There is no need to let this dishearten you, as boilers on finance makes life much easier. Boilers on finance means you can pay monthly for a new boiler, making the payment much easier.
With boilers on finance, it’s possible to spread the payment over a period of five to ten years. When you pay monthly for a new boiler, your combi boiler installation will only set you back roughly £20 per month.
Sounds much more affordable, right? Below, we reveal more about combi boiler installation and how boilers on finance allows you to pay monthly for a new boiler.
There are many benefits associated with combi boiler installation via boilers on finance whereby you pay monthly for a new boiler. Of course, when you pay monthly for a new boiler, it makes the cost of combi boiler installation a lot more manageable.
This is the main reason people consider boilers on finance. However, there are other reasons to consider boilers on finance and opting to pay monthly for a new boiler. With this type of combi boiler installation, your warranty should span the entire life of your financial agreement.
So, if you pay monthly for a new boiler over the span of five years, and your boiler breaks down within three years, you should be able to get it instantly fixed or benefit from new combi boiler installation.
Another benefit of boilers on finance is that by opting to pay monthly for a new boiler you avoid any large up-front costs on combi boiler installation. With boilers on finance, some agreements have 0% APR rates and require a small deposit, or no deposit at all.
As you can see, the benefits of opting to pay monthly for a new boiler via boilers on finance are extensive. Combi boiler installation has never been easier. Even if you currently have the money to fund combi boiler installation upfront, why drain your finances so much when you can get boilers on finance and pay monthly for a new boiler instead?
With boilers on finance, you will barely notice you are paying for that brand new combi boiler installation. After all, when you pay monthly for a new boiler, £20 or so is the equivalent to a takeaway or a few drinks down the pub.
The only thing you need to do is compare boilers your options regarding boilers on finance, so you can find the best deal on combi boiler installation.
For some it may be important to pay monthly for a new boiler over the longest period of time available. For others, they may want boilers on finance with the lowest APR. Others may want the best breakdown terms on their combi boiler installation. It’s all about what matters to you when you opt to pay monthly for a new boiler.
What about a commercial boiler that is not working? ?
Commercial boilers are complex systems that have a wider range of issues that can go wrong than your consumer boiler system for a standard home.
Nowadays we are becoming more and more aware of the damage which is being done to our planet. We are constantly remained of the detrimental impact we can be inflicting on our land if we pollute excessively.
Luckily, we are also becoming more and more aware of the different things we can do in order to reduce environmental damage as well.
There are products being released all the time which are catered to effective emission reduction. And these are products we should all be made aware of in order to ensure that we have the necessary means to do our bit.
One product which is highly effective and highly recommended for those working with hot conditions is that of the gas ceramic filter. This product has been created in order to reduce the emissions of gas.
Air pollution and the effects it can have are very much damaging and should not be ignored or undervalued. ?
A gas filter can provide those who work in a relevant industry with a fantastic method of ensuring that they are operating efficiently.
There are several different gas ceramic filters available on the market today and when you look to purchase one there are lots of things which you should be paying attention to. First and foremost, you need to ensure that the filter works in the environment you are working in.
Some of the best filters can work in areas with up to 450 degrees of heat. This means that they are applicable for a wide range of skilled work procedures and needs.
Therefore, a top ceramic filter will be beneficial whilst in product recovery processes, as well as acid recovery, the production of nano materials, and biomass wood fired boilers – to name but a few.
Once you have determined that the filter in question will operate effectively for your purpose, you should then concern yourself with how much reduction the filter can provide you with.
Every single filter you buy should come with a guarantee ensuring you that emission levels will definitely lower. You should seek a filter which boasts a reduction in particulate emission to a level around 3mg/Nm3 and below.
It importance of seeking a gas ceramic filter is something which cannot be underestimated. This is especially the case when you consider the new RHI requirements which have recently been outlined and must be followed stringently.
Moreover, with all the reports of the damage which is being done to our planet as of late, it is imperative that you do your part in order to ensure that you are reducing emissions as much as you can.
If you consider all of the points in this article then you should have no trouble finding a gas filter which is effective.
What to do if your Boiler is Not Working – Your Free Fixes
Finding out your boiler isn’t working is going to be a little panic-inducing but don’t worry! It could be a simple, easy to fix problem.
There are many reasons why your boiler is not working such as a power cut, frozen condensate pipe, issues with your gas supply, general cold weather or another problem with your boiler that is causing boiler breakdowns.Some of the reasons below why your boiler is not working are fixes that do not require a Gas Safe Registered engineer to fix your central heating system.
Gas appliances are regularly fixed by the homeowner however if you are unsure to the reason your boiler is not working and you are not confident in fixing yourself, you should contact a company to help.
We work with UK Home Cover who provide boiler cover and one-off repairs boiler boiler breakdowns. Click the banner below to go to their website.
They offer a fixed £99 call out fee if you sign up to their 12 month boiler cover plan so if you do experience break downs in future, you are fully covered.
What types of boiler breakdown do they cover for your fixed price? They cover Combi boilers (these are the most common boilers), system boilers and regular boilers.
So, without further ado let’s look at the common problems that could be causing your boiler not to work that are easy to fix.
Did You Pay The Bill? ?
Don’t laugh and think “well of course I did” because forgetting to pay your gas bill is easier than you might think. If you have an automatic payment (direct debit) set-up then a simple oversight could have caused your supplier not to be paid. Or if it isn’t an electronic/ digital issue then you might have just forgotten about it. ?
It can happen and we’ve all done it at one time or another. If you have a top-up/ pay as you go meter then you might have forgotten to put some money on it as well. Or it could all be your supplier’s fault couldn’t it? They aren’t exactly known for always taking their payment when they should are they?
So, if your boiler isn’t working make sure everything is paid up or money is on it. If it turns out there isn’t well no one needs to know do they? You can then easily correct the issue and get your boiler working again.
Is The Boiler Turned On? ▶
Well if you didn’t roll your eyes at the first possibility then you are definitely going to be doing it now, aren’t you? But you might be surprised to learn just how common this issue is! Believe it or not many people have fallen victim to this very thing. You might not even realise your boiler has an off switch in the first place or that the water pressure has gone.
Yes I know it sounds a little patronising but it can happen so if your boiler suddenly stops working then be sure to check the on/ off switch. A boiler can accidentally be turned off for a number of reasons it could be down to human error, an issue at the mains fuse box or any of the other possibilities. So, before calling in an engineer just double-check the switch or fault codes after all it costs nothing.
Is It Down To Low Pressure Problems? ?
Okay so now we are getting on to less embarrassing issues. Pressure basically means the balance of air and water in your boiler, there is more to it but we are trying to keep things simple. Your boiler needs a certain amount of pressure to work correctly which you can measure by using the pressure gauge on your boiler. A loss on boiler pressure will result in not enough water running through your boiler. ?
Now a boiler can lose pressure for a number of reasons and it doesn’t always mean there is a serious issue like a leak or damaged component. While that can happen one of the most common issues with pressure is down to the natural use of water when running your home’s heating.
Now if you notice your pressure gauge is low you can attempt to fix the problem by topping it up or to use the technical term repressurise it. This might sound complicated but it’s actually quite easy to do. First of all, find the filling loop on your boiler you’ll be able to see it under the boiler and it will often be silver in colour.
Every filling loop will have at least one black tap but some do have two. Simply turn these taps to repressurise the boiler and when the gauge reaches the number 1 or green safe zone turn the taps back. Make sure the taps are safely locked back in their original position or you’ll be having the exact opposite problem of too much pressure.
So, that’s how you check and fix pressure problems and if you do it yourself it’s free! Although you can always treat yourself for doing a good job if you want. However, if you really don’t want to do it yourself (for whatever reason) then you can always call in an engineer to assist. Still wondering why your boiler is loosing pressure then read our guide as this will tell you about boilers loosing pressure and how to fix it, even if it is leaking water.
The Pilot Light ?
That little glowing light in the boiler isn’t just for ambience, is it? No the pilot’s light does an important job basically it’s a small internal flame that ignites the gas to heat the water. If your boiler’s pilot light doesn’t light when your boiler is active then you have a problem.
The good news (kind of) is that this issue is easy to spot, most people will quickly notice when their boiler’s pilot light isn’t working. Fixing it could also be quite easy simply turning off your boiler and then turning it back on again could reignite the light. Just like a crashed computer sometimes turning it off and on again can fix the problem.
The bad news is this might not work and if it doesn’t you will need to call in a professional engineer to help you. Sometimes a boiler’s pilot light can just go out like if a sudden breeze blows past for example. But in more serious cases it could be because of internal damage but still, you lose nothing by trying the reset method do you? ?
The Condensate Pipe ??
This is a seasonal issue as you will likely only have issues with your condensate pipe during the winter months. Unless you live in a place with a very cold climate, of course. The condensate pipe travels from your boiler to the nearest outside wall so it should be easy enough to find.
The condensate pipe is where excess liquid (created by condensation) is collected and deposited. It drops outdoors in small drips and is susceptible to freezing during the winter. If this does happen then it will cause a blockage which as I’ am sure you can guess is not going to be a good thing. I mean when is a blockage ever good news?
Because the boiler has no escape route for the water (now that it’s blocked) it will essentially shut down. Now, this might sound like a big problem but fixing the issue is easier than you might think! All you need to do is gently pour some warm (not hot) water over the pipe to slowly melt the frozen blockage. Once that is done reboot the boiler and it should be working again.
Your boiler’s thermostat is a very misunderstood device in many ways. A lot of people oversimplify things it doesn’t just give a temperature reading. In fact, in more modern boilers the thermostat acts as an all singing all dancing control panel.
So, you can probably see where this going already can’t you? If this thermostat isn’t working correctly then your boiler won’t. This can show itself in many ways but usually, your boiler simply won’t power on. So, how do you fix this kind of problem??
Well, it all depends on what the issue with the thermostat is. If it isn’t charged, the batteries have run out or your Wi-Fi isn’t working correctly then your boiler could simply not turn on. Thankfully all these problems are quite easy to fix on your own.
And it won’t cost you a thing unless you need to buy some new batteries that is. However, if the thermostat is damaged in some way then you may need to call in an engineer to help you. Or at the very least refer to your boiler’s manual for more in-depth guidance.
Boiler Not Working? – Your Certainly Not Free Fixes ?
If your boiler isn’t working and it’s not a simple easy to fix problem then bad news I’ am afraid because you might need to pay a lot of money to get things back in business. How much things will cost can vary considerably but let’s look at the common problems with expensive solutions.
Low Pressure Problems Again! ☹
Yes I know I talked about this before but that was quite a while ago so let me briefly reiterate my point. While low pressure can be fixed by repressuring your boiler which thanks to our handy instructions earlier you should be able to do for free, that isn’t the only potential issue that can cause low pressure problems.
Low pressure problems that stop your boiler from working can happen for a variety of reasons. Leaks and damaged components are two of the more common causes and both of these problems will require professional assistance to fix.
Patching a leak can sometimes be quite cheap if it’s small and easy to get to (if it isn’t then expect to pay a lot more) but replacement components can be quite costly. If you are suffering repeated issues with low pressure and things keep breaking down or leaks keep springing then it could be a sign your boiler is getting to old as well. So, you might want to consider upgrading to a newer model.
Boiler/ System Leaks ?
Speaking of leaks let’s talk more about them! Leaks in boilers come in two main forms system leaks and boiler leaks, yes I know it’s a little confusing but I’ll explain. A system leak means the leak could be anywhere within reason of course.
Since a boiler is linked up to your home’s heating system the leak could be near a radiator, at one of the main pipes leading out from your boiler or at a completely random spot in your home. These types of leaks can be hard to track down although they are more commonly found at the joints in pipes.
A boiler leak is going to be a leak inside the boiler itself so in most cases it will be easier to identify and find. But both system and boiler leaks will need professional assistance to repair or even find in some cases which means you can expect to pay.
How much you’ll need to pay can vary quite considerably however the bad news is, either way, it won’t be free. If you do get leaks repaired make sure you keep an eye out for them in the future. If leaks keep springing up then it could be a sign that you need to get a new boiler.
My Boiler Simply Won’t Turn On ?
If your boiler just isn’t showing any signs of life and you’ve been through everything else on this list then oh dear. This likely means it is an electrical issue which can mean many different things. Some might be quite simple and easy to diagnose and fix whereas others could take much more time and be much more expensive. ?
So, what can you do about this? Well apart for the good old fashioned turn it off and turn it back on again method or saying a quick prayer you don’t really have many options but to call in a professional to inspect the boiler. One of the most common causes of this is that the PCB board (as you can likely guess this is a circuit board) no longer functions.
But you might be lucky it could just be that a fuse needs replacing. But even if it is a simple, easy to fix issue you will still need to call in an engineer to find out what is causing it and then pay to get the problem fixed.
My Boiler Is Operational But Doesn’t Heat Up ❌?
Well let’s close out our look at the more costly repairs with this conundrum, shall we? If your boiler looks like it is operating properly but your radiators aren’t heating up or there is no hot water from your boiler, then what should you do?
Well if it’s your radiators that aren’t heating up then it likely means there is a blockage somewhere. Again this likely sounds much worse than it is, radiators do pick up debris and dirty water and become congested over time.
An engineer will be able to fix this problem by carrying out a power-flush which will cleanse all your pipes and get your radiators working again. Now if your boiler seems to be working okay but the water is running cold then what should you do? Call a home boiler cover company?
Well, this will usually be down to some internal component not working. Most likely it will be the diverter valve which isn’t operating as it should. The diverter valve is what moves water around to the different areas of your home. An engineer will need to repair or replace the valve which can be quite costly in some cases.
If it isn’t the valve causing the problem then it could be several other things. But an engineer will be able to find the problem components with some searching. And then once they know what it is they’ll carry out any repairs or replacements needed.
So, that finishes up our (hopefully) helpful guide to what to look out for and do if your boiler isn’t working. Yes, there is a lot to think about and consider but if you’re lucky you might be able to get it working again on your own! And if you can’t then professional help is always available.
If you need to get a new boiler, you can get a fixed online price and purchase your boiler online within minutes. If you are struggling to decide which size boiler fits your home then read our guide on which size boiler fits your home.
So what should i do now with my broken boiler?
If you need help deciding whether to repair or replace your boiler that is nor working, you can get a fixed price online for a new boiler within minutes. You can pay by card securely or opt for boiler finance with no deposit and up to 10 years in duration.
If you think you can repair the boiler, speak to our partners UK Home Cover.
We hope you have enjoyed this guide on what to do if your boiler is broken 🙂